Multi-functional pond fountain pump.
Though supplied in the classic fountain pump design, the Blagdon 5500 can be used for a variety of pond uses. The most obvious is to run the pump as a fountain, which is where this pump excels with its powerful motor and a long list of no less than 5 different fountain heads. But as well as the fountain this pump has the connective ability to run many jobs simultaneously. Attach 1" hose to the T-piece and water can be divided off to run to a pond filter or waterfall. Whatever job the Midipond 5500 is asked to do it will perform with little maintenance required. It is clog resistant which prevents the pump impeller getting bunged up with dirt and allows it to run continuously.
Dimensions:
* Length: 28cm
* Width: 12cm
* Height: 17.5cm
Weight: 4.2kg
Voltage: 230V/50Hz
Wattage: 100w
Power cable length: 10m
Guarantee: 3 years
Maximum flow-rate: 5,360lph (1,179gph)
Flow-rate at 1m head height: 4,125lph
Maximum head height: 3.25m
Maximum lift: 3.3m (10'8")
Physical height from base of pump to top of fountain: 59cm
Fountain heads (height x width):
* Bell: n/a x 55cm
* Daisy: 100cm x 160cm
* Foam: 25cm x 20cm
* Triple: 70cm x 100cm
* Tulip: 30cm x 150cm
Outlet size: 12/20/25mm
Here we have outlined some key maintenance tips for your pond in January.
See All Tips and Advice© Copyright Pondkeeper 2005 - 2024. Pondkeeper is registered in England, Registration no. 5601027. Our VAT number is GB 875 4886 60.
See the site map | privacy policy | terms and conditions.
Website created by Edward Robertson web design with the Responsive Grid System